Remove/install park pawl actuator

AR35.31-P-0001EQ

Remove/install park pawl actuator

16.12.2019

Model

293

Modification notes

13.12.2019

Remove voltage of high-voltage on-board electrical system, added.

Operation step 1

1

Line bracket

2

Bolts

3

Protective cover

4

Bolts

7

Gear

5

Cover

8

Bolts

6

Retaining ring

9

Park pawl actuator

 Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.

AS00.00-Z-0035-01A

Topical note

General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment

AH00.00-Z-0300-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Notes on safety-relevant components

AH00.00-Z-0019-01A

 

Remove/install

1

Remove voltage of high-voltage on-board electrical system.

AR47.70-P-1000EQ

2

Remove axle drive module of rear axle.

AR08.10-P-0007EQ


Engage park pawl.
Otherwise the park pawl actuator (9) will be under stress.

3

Unclip line bracket (1) from protective cover (3).

 Dismantling tool

*000589956300

4

Remove bolts (2) .

5

Remove protective cover (3).

6

Remove screws/bolts (4).

7

Disconnect electrical connector from cap (5) and remove the cap (5).

 Replace seal in cap (5).

8

Remove retaining ring (6).

9

Remove gear (7).

10

Remove bolts (8).

11

Remove park pawl actuator (9).

12

Install in the reverse order.

13

Perform commissioning of park pawl actuator (9).

When replacing park pawl actuator (9).



AD00.00-P-2000-06FR