Detach/attach axle boot of ball joint

AR35.30-P-0665-03OID

Detach/attach axle boot of ball joint

Model

167

 Rear axle shaft, plugged in shafts

Number

Designation

Model 167

BF35.30-P-1001-01H

Filling capacity for joint housing

Inner joint

Ø82

g

105

Ø91

g

135

Ø95

g

165

Ø102

g

185

Outer joint

Ø84

g

85

Ø91

g

110

Ø95

g

140

Ø103

g

135

1

Remove clamps (1, 2).

4

Outer joint

1

Clip

5

Inner joint

2

Clip

6

Inner axle boot

3

Front axle shaft

7

Outer axle boot

2

Remove inner axle boot (6) or outer axle boot (7).

3

Fill inner axle boot (6) and  inner joint (5) or  outer axle boot (7) and  outer joint (4) with grease .

 Use grease from the repair kit. Only use quantity of grease from repair kit.

4

Attach and position inner axle boot (6) or outer axle boot (7).

5

Pinch new clamps (1, 2) together using commercially available pincers and check that they are seated correctly.

 The connections of the clamps (1, 2) at the inner joint (5) must be offset by 180° relative to the outer joint (4).
Otherwise there will be imbalance on the front axle shaft (3).