ar3520p3403eq

Remove/install elastomer bearing of thrust arm on wheel carrier

Typ ar · temat 35.20 · wersja 0100 · 2019-05-23

Dotyczy: Model 293

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 35 Oś tylna › 35.20 Prowadnica koła, piasta — Seria 293

EinPAS 17 Zespół przeniesienia napędu/ oś › 17.51 Oś tylna › 17.51.40 Wahacz poprzeczny/wahacz/stabilizator — Seria 293

AR35.20-P-3403EQ

Remove/install elastomer bearing of thrust arm on wheel carrier

11.04.2019

Model

293

Remove/install elastomer bearing of thrust arm on wheel carrier

01

Extraction and insertion tool

2

Elastomer bearing

3

Wheel carrier

P35.20-2316-12

Remove/install elastomer bearing of thrust arm on wheel carrier

P35.20-2317-09

01

Extraction and insertion tool

3

Wheel carrier

2

Elastomer bearing

a

Cutout

Topical note

Notes on handling, transport and storage of composite brake disks

AH42.10-P-9406-12LF

Notes on repair work on suspension components

AH00.00-P-0100-01A

Notes on safety-relevant components

AH00.00-Z-0019-01A

Remove

1

Remove corresponding thrust arm.

AR35.20-P-0113LW

2

Position extraction and insertion tool (01) on wheel carrier (3) and elastomer bearing(2).

Extraction and insertion tool

*204589034300

3

Pull elastomer bearing (2) out of wheel carrier (3) in direction of arrow and remove.

Install

4

Position extraction and insertion tool (01) with new elastomer bearing (2) on wheel carrier (3).

Make sure that the extraction and insertion tool (01) is seated correctly.

5

Draw elastomer bearing (2) into wheel carrier (3) in direction of arrow.

Draw elastomer bearing (2) in until the elastomer bearing (2) fully covers the cutout (a) in the extraction and insertion tool (01) (arrow).

6

Remove extraction and insertion tool (01).

7

Install thrust arm.

AR35.20-P-0113LW

Remove/install elastomer bearing of thrust arm on wheel carrier

204 589 03 43 00

Extraction and insertion tool

Powiązane dokumenty