Remove/install spring control arm and replacement of rubber mount

AR35.20-P-0114A

Remove/install spring control arm and replacement of rubber mount

16.12.09

Figure item, etc.

Work instructions

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between the four columns of the vehicle lift and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer

AS00.00-Z-0010-01A

 Installation

Replace self-locking nuts



Remove/install rear spring

AR32.20-P-0230A

6j

Remove shock absorber or spring strut

Detach from spring control arm

 Vehicles without level control/ADS

*BA32.25-P-1002-03B

 Vehicles with level control/ADS

*BA32.30-P-1002-01A

6

Spring control arm

 Installation: The rear axle shaft must be horizontal when tightening the nuts

 Spring control arm to rear axle carrier

*BA35.20-P-1001-01A

 Spring control arm to wheel carrier

*BA35.20-P-1002-01A

6b

Rubber mount of spring control arm

 If necessary after checking:

Remove/install spring control arm rubber mount

AR35.20-P-0114-01A

Number

Designation

Model 140

BA32.25-P-1002-03B

Self-locking nut for attaching shock absorber to spring control arm

Nm

100

Number

Designation

Model 140 with level control/ADS

BA32.30-P-1002-01A

Self-locking nut, suspension strut level control/ADS to spring control arm

Nm

100

Number

Designation

Model
140

BA35.20-P-1001-01A

Self-locking nut, spring control arm to rear axle carrier

Stage 1

Nm

70

Stage 2

°

-

BA35.20-P-1002-01A

Self-locking nut, spring control arm to wheel carrier.

Stage 1

Nm

120

Stage 2

°

-