Remove/install elastomer bearing of front suspension of rear axle carrier

AR35.10-P-0044RFW

Remove/install elastomer bearing of front suspension of rear axle carrier

28.11.2018

Model

253.992/993

Shown for better overview with removed rear axle

1

Rear axle

2

Front elastomer bearing

 Danger

Risk of explosion caused by escaping hydrogen or overheating of the fuel tanks when working on the hydrogen system. Risk of frostbite to body parts caused by escaping gas and by touching component parts carrying gas when emptying fuel tanks. Risk of asphyxiation caused by inhalation of air diluted by hydrogen. Risk of burn injuries by coming into contact with an invisible pale blue hydrogen flame.

AS00.00-Z-0030-01B

 Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

 Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

Notes on handling, transport and storage of composite brake disks

AH42.10-P-9406-12LF

Topical note

Notes on fuel cell system

AH00.00-P-0022-01RFW

Topical note

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

Notes on safety-relevant components

AH00.00-Z-0019-01A

Notes on repair work on suspension components

AH00.00-P-0100-01A

 

Remove/install

1

Ensure that the requirements for driving into the workshop are fulfilled.

Topical note

Requirements for driving into the workshop

AH00.00-P-0021-01RFW

2

Print out "tank system, fuel cell, form event log," fill out, and attach to the vehicle somewhere clearly visible.



OF00.00-P-3000-21RFW

3

Lower rear axle (1) at front far enough to gain access to the elastomer bearings at the front (2).

AR35.10-P-0015RFW

4

Remove elastomer bearings at front (2).

AR35.10-P-0040-02LW

 Always replace the elastomer bearings at the front (2) in pairs.

Lubricant, rubber assembly 1 l

*BR00.45-Z-1010-06A

 Extraction and insertion tool

*205589004300

 Hydraulic hose (complete)

*652589003323

 Hollow cylinder

*652589003322

 Hand pump

*652589003321

 Securing belt

*001589016300

5

Install in the reverse order.

6

Perform chassis alignment.

AR40.20-P-0200LW

Repair materials

Number

Designation

Order number

BR00.45-Z-1010-06A

Lubricant, rubber assembly 1 l

A 000 989 03 67