ar3330s6530ef

Remove/install front axle shaft

Typ ar · temat 33.30 · wersja 0201 · 2020-02-06

Dotyczy: Model 447 with engine 622

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 33 Oś przednia › 33.30 Napęd, mechanizm różnicowy, wał napędowy — Seria 447 · Seria 622

EinPAS 17 Zespół przeniesienia napędu/ oś › 17.50 Oś przednia › 17.50.51 Półoś/ wałek napędowy — Seria 447 · Seria 622

AR33.30-S-6530EF

Remove/install front axle shaft

05.02.2020

Model

447 with engine 622

Remove/install front axle shaft

S33.30-4526-09

2

Ball head

4

Screw/bolt

3

Bearing

5

Front axle shaft

Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Remove/install

1

Remove respective front axle transverse control arm

AR33.20-S-1452EF

2

Remove respective ball head (2) from steering knuckle

AR46.40-S-7242E

Ball head (2) is not removed completely.

3

Drain transmission oil

Manual transmission - oil change

AP26.00-S-2601EF

4

Unfasten bearing (3) of front axle shaft (5)

Only when removing the right-hand front axle shaft (5).

To do this, remove screw/bolt (4).

Screw, bearing front axle shaft to holder

*BA33.30-N-1002-02C

5

Remove respective front axle shaft (5) from wheel hub

6

Remove respective front axle shaft (5) from transmission flange

7

Replace respective radial shaft sealing ring on transmission flange

AR26.40-S-0339EF

8

Install in the reverse order

Front axle shaft

Number

Designation

Model 447 with engine 622, 780.701
Model 447 with engine 651, 654
with code ZG2 (Permanent all-wheel drive)

BA33.30-N-1002-02C

Screw, bearing front axle shaft to holder

Nm

21

Powiązane dokumenty