Remove/install left front axle shaft

AR33.30-S-0621F

Remove/install left front axle shaft

29.01.2020

Model

447 with engine 780.701/702

1

Front axle shaft

3

Axle drive module

2

Press-out tool

 Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.

AS00.00-Z-0035-01A

Topical note

General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment

AH00.00-Z-0300-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

 

Remove/install

1

Remove left transverse control arm.

AR33.20-S-1452EF

2

Remove left ball head from left steering knuckle.

AR46.40-S-7242E

3

Pull front axle shaft (1) out of wheel hub.

4

Pry front axle shaft (1) out of axle drive module using end of knock-out tool (2) marked with "L", and remove in direction of arrow (arrow A).

 Installation:
Handle front axle shaft (1) carefully,
otherwise the radial shaft sealing ring may be damaged.

 Press-out tool

*245589003300

5

Remove radial shaft sealing ring.

AR08.10-S-0052F

 Installation: replace radial shaft sealing ring.

6

Install in the reverse order.