ar3320d145203f
Attach transverse control arm to steering knuckle and front axle beam
Typ ar · temat 33.20 · wersja 0101 · 2016-05-19
Dotyczy: Model 909
Niedostępne w języku „pl”; wyświetlono w języku Angielski.
Umiejscowienie
Grupa funkcyjna 2 Podwozie › 33 Oś przednia › 33.20 Prowadnica koła, piasta — Seria 909
EinPAS 17 Zespół przeniesienia napędu/ oś › 17.50 Oś przednia › 17.50.41 Wahacz poprzeczny/wahacz/stabilizator — Seria 909
AR33.20-D-1452-03F
| Attach transverse control arm to steering knuckle and front axle beam
|
|
|
Number
| Designation
|
|
| Front axle 730.409/411, 732.212 in model 909
|
BA33.20-N-1003-01A
| Bolt, stop plate to transverse control arm
| M10
| Nm
| 60
|
Number
| Designation
|
|
| Front axle 730.409/411, 732.212 in model 909
|
BA33.20-N-1005-01A
| Nut, wishbone to steering knuckle
| M201.5
| Nm
| 280
|
Number
| Designation
| Order number
|
BR00.45-Z-1010-06A
| Lubricant, rubber assembly 1 l
| A 000 989 03 67
|
1
| Apply coating of lubricant to elastomer bearing of transverse control arm (12)
|
2
| Support transverse control arm (12) with vehicle jack.
|
3
| Insert front transverse control arm into mounting console and fix in place with bolt (2) and nut (3).
|
|
| Do not tighten nut (3) yet.
|
4
| Lower jack under transverse control arm (12).
|
5
| Insert rear transverse control arm into mounting console and fix into place with bolt and nut.
|
|
| Do not tighten nut yet.
|
6
| Mount stop plate (7) on transverse control arm (12).
|
7
| Place transverse control arm joint on steering knuckle (10) and tighten nut (13) on transverse control arm joint.
|
