Remove/install elastomer bearing on transverse control arm

AR33.20-D-1452-01F

Remove/install elastomer bearing on transverse control arm

Model

909

Repair materials

Number

Designation

Order number

BR00.45-Z-1010-06A

Lubricant, rubber assembly 1 l

A 000 989 03 67

1

Transverse control arm

2

Rubber mount

1

  Insert drift (01) into rubber mount to be pressed out.

2

  Position drift (01) with the rubber mount to be pressed out on  press-out sleeve (03) in the press and press out rubber mount.

3

Coat new rubber mount with lubricant.

4

 Position press-in/press-out tool with transverse control arm and new rubber mount in the press, as shown.

5

Press in rubber mount until it abuts with the drift in the transverse control arm.

6

 Insert drift into rubber mount from below.

7

 Place counterholder on rubber mount and press back rubber mount until it is seated centrally in the transverse control arm.