ar3250p0013rx

Remove/install pulsation damper

Typ ar · temat 32.50 · wersja 0103 · 2009-11-17

Dotyczy: MODEL 230.456 /458 with CODE (487) Active Body Control (ABC) MODEL 230.470 /471 /472 /477 MODEL 230.479 as of model year 2006

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 32 Zawieszenie › 32.50 Active-Body-Control (ABC), elektrohydrauliczna amortyzacja — Seria 230 (modele 456, 458, 470, 471, 472, 477, 479)

EinPAS 20 Zawieszenie › 20.16 Zawieszenie › 20.16.30 Resor/resor pneumatyczny/amortyzator/kolumna zawieszenia — Seria 230 (modele 456, 458, 470, 471, 472, 477, 479)

AR32.50-P-0013RX

Remove/install pulsation damper

11.11.09

MODEL 230.456 /458 with CODE (487) Active Body Control (ABC)

MODEL 230.470 /471 /472 /477

MODEL 230.479 as of model year 2006

Remove/install pulsation damper

P32.50-2235-08

1 Tandem pump

2 Pulsation damper

4 Fixing arm

3 Threaded opening

Remove/install

Notes on Active Body Control suspension

AH32.50-P-0001-01N

1

Remove tandem pump (1)

Model 230.456/ 458/ 471

AR46.30-P-0500RX

Model 230.470

AR46.30-P-0500RMG

Model 230.472

AR46.30-P-0500R

Model 230.477/ 479

AR46.30-P-0500RB

2

Clean the area around the pulsation damper (2)

3

Clamp tandem pump (1) at the fixing arm (4) in the vise so that the pulsation damper (2) points towards the ground

The pulsation damper (2) may only be detached from the tandem pump (1) with the threaded opening (3) downwards, otherwise dirt will enter the tandem pump (1). In the event of noncompliance this can lead to the failure of the ABC system.

4

Remove pulsation damper (2) from the tandem pump (1)

Installation: Pay attention to correct seat of the sealing ring.

*BA32.50-P-1030-01A

Notes on scrapping gas-filled hydraulic components

OS00.00-P-1000-01A

5

Install in the reverse order

Active Body Control suspension

Number

Designation

Model
230

BA32.50-P-1030-01A

Pulsation damper to tandem pump

Nm

45

Powiązane dokumenty