AR32.50-P-0010R | Remove/install front suspension pressure reservoir | 18.12.09 |
MODEL 230.467 with CODE (487) Active Body Control (ABC)
MODEL 230.474 /475 /476
MODEL 230.479 up to Model Year 2006
P32.50-2146-05
14 Front axle pressure reservoir
14a Nuts
SP Pressure reservoir pressure line
Y36/1 ABC front axle valve unit
Modification notes
22.10.02 | Safety note, included for the first time | ||
22.10.02 | Special instructions on connecting hydraulic lines and hoses have been added | ||
5.3.03 | Value changed from 50 Nm to 45 Nm | Figure in Columns 1001, 1002, 1003, 1012, Lines 1 and 2, 1013 revised for Model Series 230 | |
5.3.03 | Value changed from 8 Nm to 9 Nm | Value revised in row 1004, 1008, 1015, 1016, 1017 on model 230 |
| Remove/install | ||
Danger! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer. | |
Danger! | Risk of injury to skin or eyes caused by hydraulic fluid spraying out under high pressure. Risk of poisoning caused by swallowing hydraulic fluid | Depressurize the hydraulic system completely before starting any work on the system. Wear protective clothing and safety glasses. | |
Danger! | Risk of injury caused by drilling gas-filled assemblies or components (noncombustible gases) | Wear safety glasses and a face mask. | |
| Notes on Active Body Control suspension | ||
1 | Remove left and right front section of the lower engine compartment paneling | ||
2 | Relieve pressure in ABC system | ||
| |||
3 | Detach pressure reservoir pressure line (SP) from front axle and from front axle ABC valve unit (Y36/1) | | |
| |||
| |||
| Notes on fitting hydraulic lines and hoses | ||
4 | Unscrew nuts (14a) and remove front axle pressure reservoir (14) | | |
| Notes on scrapping gas-filled hydraulic components | ||
| Disposing on spring actuator | ||
5 | Install in the reverse order | ||
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running | Secure vehicle to prevent it from moving by itself. | |
6 | Fill and bleed ABC system |
Active Body Control, lines
Number | Designation | Model | ||
BA32.50-P-1001-02B | Bleed screw on soldered fitting in hydraulic line | M101 | Nm | 20 |
Active Body Control suspension
Number | Designation | Model 230 | ||
BA32.50-P-1001-01A | Union nut, line to pressure reservoir | Nm | 45 | |
BA32.50-P-1002-01A | Union nut, line to front/rear axle valve body | Nm | 45 | |
BA32.50-P-1004-01A | Nut, front axle pressure reservoir to retaining plate | Nm | 9 | |
Box wrench bit
000 589 68 03 00
Powiązane dokumenty
- ah3250p000101n Wskazówki dotyczące zawieszenia Active Body Control
- ah3250p000102a Wskazówki dotyczące montażu elastycznych i sztywnych przewodów hydraulicznych
- ar3250p000101n Redukcja ciśnienia Active Body Control (ABC)
- ar3250p0021n Napełnianie i odpowietrzanie układu Active Body Control (ABC)
- ar6120p1105r Demontaż i montaż dolnej okładziny komory silnika
- as0000z000501a Niebezpieczeństwo wypadku na skutek samoczynnego ruszenia przy pracującym silniku. Niebezpieczeństwo obrażeń na skutek zmiażdżenia lub poparzenia przy wykonywaniu czynności podczas rozruchu lub przy pracującym silniku.
- as0000z000601a Niebezpieczeństwo obrażeń na skutek wiercenia w zespołach i elementach wypełnionych gazem (wypełnienie gazowe niepalne).
- as0000z001001a Zagrożenie życia na skutek ześlizgnięcia lub spadnięcia pojazdu z podnośnika.
- as0000z001301a Niebezpieczeństwo obrażeń oczu i skóry przez płyn hydrauliczny pod ciśnieniem. Niebezpieczeństwo zatrucia w wyniku spożycia płynu hydraulicznego
- os0000p100001a Wskazówki dotyczące złomowania elementów układu hydraulicznego wypełnionych gazem
- os3230p062001a