Shown on model 470 |
1 | Screw |
2 | Screw |
3 | Bracket |
4 | Stabilizer bar |
5 | Elastomer bearing |
6 | Spacer |
S32.35-4530-06
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Warning | Risk of injury caused by pinching or crushing when working on springs or spring bodies that are under tension | Use only approved tensioning devices; additionally screen off hazardous area if necessary. Check special tools for damage and proper operation (visual inspection). Wear protective gloves. | |
| Remove/install | ||
1 | Raise vehicle. | ||
Topical note | Special instructions for lifting and supporting vehicle | ||
2 | Loosen screws (1) a few turns. | Screw/bolt, rear axle stabilizer bar bracket to rigid axle | |
3 | Remove brackets (3). | To do so, remove screws (2) and remove bracket (3) downwards. | |
Screw/bolt, rear axle stabilizer bar bracket to rigid axle | |||
4 | Remove elastomer bearings (5) from stabilizer bar (4). | Installation: The lugs (arrows) of the elastomer bearings (5) must point downwards. | |
5 | Install in the reverse order. |
Powiązane dokumenty
- ah0060n010001p Wskazówki dotyczące podnoszenia pojazdu, ustawiania na podporach
- ar0060s100004p
- as0000z000101a Niebezpieczeństwo obrażeń na skutek zakleszczenia lub zmiażdżenia podczas czynności przy wstępnie naprężonych resorach lub elementach sprężynujących.
- as0000z001001a Zagrożenie życia na skutek ześlizgnięcia lub spadnięcia pojazdu z podnośnika.