Shown on model 470 |
1 | Bolts |
2 | Bracket |
3 | Bolts |
4 | Elastomer bearing |
5 | Spacer |
S32.35-4532-06
Warning | Risk of injury caused by pinching or crushing when working on springs or spring bodies that are under tension | Use only approved tensioning devices; additionally screen off hazardous area if necessary. Check special tools for damage and proper operation (visual inspection). Wear protective gloves. | |
| Remove/install | ||
1 | Remove front lower engine compartment paneling | ||
2 | Slacken screw/bolts (1) | Screw/bolt, front axle stabilizer bar bracket to crossmember | |
3 | Remove bolts (3) and remove bracket (2) | Screw/bolt, front axle stabilizer bar bracket to crossmember | |
4 | Remove elastomer bearings (4) | Installation: The elastomer bearings (4) must make contact externally with the side of the spacers (5). | |
5 | Install in the reverse order |
Powiązane dokumenty
- ar6120s1105p
- as0000z000101a Niebezpieczeństwo obrażeń na skutek zakleszczenia lub zmiażdżenia podczas czynności przy wstępnie naprężonych resorach lub elementach sprężynujących.