Remove/install front stabilizer bar linkage

AR32.35-P-3330RG

Remove/install front stabilizer bar linkage

04.08.2020

Model

190

Modification notes

17.07.2020

Remove rear guide vane from front axle.

Operation step 1.2.

Shown on right side of vehicle except code M032 (Black Series version)

1

Stabilizer bar linkage

2

Nut

3

Nut

Topical note

Notes on handling, transport and storage of ceramic brake disks

AH42.10-P-9406-13A

Topical note

Notes on handling, transport and storage of composite brake disks

AH42.10-P-9406-12LF

Topical note

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

Notes on repair work on suspension components

AH00.00-P-0100-01A

 

Remove/install

1.1

Remove corresponding front wheel.

Model 190
except code M032 (Black Series version)

AR40.10-P-1100RQ

1.2

Remove rear guide vane from front axle.

Model 190
with code M032 (Black Series version)

AR42.10-P-0102RG

2

Remove nut (3) of torsion bar linkage (1) at lower transverse control arm.

 Nut, torsion bar linkage to lower transverse control arm

*BA32.35-P-1002-02C

3

Remove nut (2) of torsion bar linkage (1) at stabilizer.

 Nut, torsion bar linkage to stabilizer bar

*BA32.35-P-1001-02C

4

Remove torsion bar linkage (1).


Handle carbon stabilizer (1) carefully.
It may be damaged otherwise.

 Model 190
with code 478 (AMG RIDE CONTROL)
Installation: Secure torsion bar linkage (1) in outer bore of stabilizer.

 Model 190
with code M032 (Black Series version)
Installation: Secure torsion bar linkage (1) in inner bore of stabilizer.



Check

5

Check ball heads of torsion bar linkage (1) and their boots for condition and damage.

If there is a problem,



replace torsion bar linkage (1).

6

Install in the reverse order.

 Front axle stabilizer bar

Number

Designation

Model 190

BA32.35-P-1001-02C

Nut, torsion bar linkage to stabilizer bar

Nm

98

 Front axle stabilizer bar

Number

Designation

Model 190

BA32.35-P-1002-02C

Nut, torsion bar linkage to lower transverse control arm

Nm

98