ar3235p3330eq

Remove/install front stabilizer bar linkage

Typ ar · temat 32.35 · wersja 0100 · 2019-06-12

Dotyczy: Model 293

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 32 Zawieszenie › 32.35 Stabilizator — Seria 293

EinPAS 17 Zespół przeniesienia napędu/ oś › 17.50 Oś przednia › 17.50.41 Wahacz poprzeczny/wahacz/stabilizator — Seria 293

AR32.35-P-3330EQ

Remove/install front stabilizer bar linkage

30.01.2019

Model

293

Remove/install front stabilizer bar linkage

Shown on right side of vehicle

1

Stabilizer bar linkage

2

Nut

3

Stabilizer bar

4

Guide pin

5

Cutout

6

Steering knuckle

P32.25-2350-06

Topical note

Notes on handling, transport and storage of composite brake disks

AH42.10-P-9406-12LF

Topical note

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

Notes on repair work on suspension components

AH00.00-P-0100-01A

Remove/install

1

Remove front wheel.

AR40.10-P-1102A

2

Unbolt nut (2).

Nut, torsion bar linkage to steering knuckle

*BA32.35-P-1006-02B

3

Remove torsion bar linkage (1) from stabilizer bar (3).

Torsion bar linkage to stabilizer bar

*BA32.35-P-1005-02B

4

Pull torsion bar linkage (1) out of steering knuckle (6).

Installation:
The guide pin (4) must engage in the cutout (5) of the steering knuckle (6).
Otherwise, the steering knuckle (6) will be damaged.

Check

5

Check ball heads of torsion bar linkage (1) and their boots for condition and damage.

In the event of a problem,

replace torsion bar linkage (1).

6

Install in the reverse order

Front axle stabilizer bar

Number

Designation

Model 293

BA32.35-P-1005-02B

Torsion bar linkage to stabilizer bar

Nm

100

Front axle stabilizer bar

Number

Designation

Model 293

BA32.35-P-1006-02B

Nut, torsion bar linkage to steering knuckle

Nm

80

Powiązane dokumenty