ar3235p2200fra

Remove/install stabilizer bar at front axle

Typ ar · temat 32.35 · wersja 0100 · 2018-08-15

Dotyczy: Model 257 with code M005 (4MATIC) Model 290

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 32 Zawieszenie › 32.35 Stabilizator — Seria 257 · Seria 290

EinPAS 17 Zespół przeniesienia napędu/ oś › 17.50 Oś przednia › 17.50.41 Wahacz poprzeczny/wahacz/stabilizator — Seria 257 · Seria 290

AR32.35-P-2200FRA

Remove/install stabilizer bar at front axle

31.07.2018

Model

257

with code M005 (4MATIC)

Model

290

Remove/install stabilizer bar at front axle

P32.35-2059-08

Shown on model 257 with code M005 (4MATIC)

1

Stabilizer bar

4

Bolts

7

Fender liner

2

Screw

5

Stabilizer bar linkage

8

Longitudinal member panel

3

Diagonal strut

6

Front axle carrier

Topical note

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

Notes on repair work on suspension components

AH00.00-P-0100-01A

Remove/install

1

Remove center and rear engine compartment lining.


Model 290

AR61.20-P-1105FRX

Model 257
with code M005 (4MATIC)

AR61.20-P-1105FR

2

Loosen left and right fender liner (7) at front in area of diagonal struts (3).

AR88.10-P-1301FR

3

Loosen left and right longitudinal member panel (8) in area of diagonal struts (3).

AR88.80-P-6000FR

4

Loosen bolts (4).

Bolt, stabilizer bar to front axle carrier

*BA32.35-P-1004-02B

5

Unscrew screws (2) and remove left and right diagonal strut (3).

Mount, support (strut)

*BA33.10-P-1002-01Q

6

Remove torsion bar linkage (5) at left and right from stabilizer bar (1).

Torsion bar linkage to stabilizer bar

*BA32.35-P-1005-02B

7

Remove right suspension strut at spring link.

Model 257
with code 489 (AIR BODY CONTROL)
with code M005 (4MATIC)
Model 290
with code 489 (AIR BODY CONTROL)

Installation:
Screw of right suspension strut at spring link must be inserted forwards from rear.
Otherwise the brake or the rim may be damaged.

Nut, suspension strut to spring control arm

*BA32.25-P-1002-04P

8

Remove screws (4) and lower stabilizer bar (1).

Installation: Fit bolts (4) but do not tighten.

9

Remove stabilizer bar (1) towards rear.

Push right suspension strut outwards to the side.

10

Install in the reverse order.

Suspension struts

Number

Designation

Model 257

Model 290

BA32.25-P-1002-04P

Nut, suspension strut to spring control arm

Stage 1

Nm

95

95

Stage 2

°

45

45

Front axle stabilizer bar

Number

Designation

Model 257
with code M005 (4MATIC)

Model 290

BA32.35-P-1004-02B

Bolt, stabilizer bar to front axle carrier

Nm

120

120

Front axle stabilizer bar

Number

Designation

Model 257
with code M005 (4MATIC)

Model 290

BA32.35-P-1005-02B

Torsion bar linkage to stabilizer bar

Nm

100

100

Front axle carrier

Number

Designation

Model 257

Model 290

BA33.10-P-1002-01Q

Mount, support (strut)

Nm

110

110

Powiązane dokumenty