ar3233p0022eq

Remove/install rear axle electronic level control control unit

Typ ar · temat 32.33 · wersja 0100 · 2019-04-04

Dotyczy: Model 293

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 32 Zawieszenie › 32.33 Układ poziomowania nadwozia (NR/ENR) — Seria 293

EinPAS 20 Zawieszenie › 20.20 Układ poziomowania › 20.20.11 Moduł sterujący/ przekaźnik — Seria 293

AR32.33-P-0022EQ

Remove/install rear axle electronic level control control unit

22.03.2019

Model

293

Remove/install rear axle electronic level control control unit

1

Nut

2

Bracket

3

Nuts

N97

Rear axle electronic level control control unit

P32.33-A001-06

Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Notes on HANDS-FREE ACCESS

AH80.61-P-0001-01A

Remove/install

1

Commission rear axle electronic level control system control unit (N97).

When replacing rear axle electronic level control system control unit (N97).

AD00.00-P-2000-06FR

2

Switch off ignition and store transmitter key outside of transmission range (min. 2  m).

3

Remove left load compartment trim.

AR68.30-P-1180LWG

4

Unscrew nuts (1) and remove holder (2).

5

Remove nuts (3) from rear axle electronic level control system control unit (N97).

6

Release electrical connector and remove rear axle electronic level control system control unit (N97).

7

Install in the reverse order.

Powiązane dokumenty