P32.33-A002-09
1 | Air suspension bellows | Y36/6 | AIR BODY CONTROL valve unit | |
A9/1 | AIR BODY CONTROL compressor |
Notes on safety-relevant components | |||
Notes on level control | |||
| Remove | ||
1 | Remove front fender liner at left. | ||
| Check | ||
2 | Spray pressure line connections at AIR BODY CONTROL valve unit (Y36/6) with leak detection spray. | Leak detection spray for China | |
Leak location spray LUBRION article no. 626.04 | |||
Leakage detection spray for USA | |||
Snoop Leak detection fluid | |||
Leak detection spray | |||
3 | Spray pressure line connections at AIR BODY CONTROL compressor (A9/1) with leak detection spray. | Leak detection spray for China | |
Leak location spray LUBRION article no. 626.04 | |||
Leakage detection spray for USA | |||
Snoop Leak detection fluid | |||
Leak detection spray | |||
4 | Spray pressure line connections at air suspension bellows (1) with leak detection spray. | Leak detection spray for China | |
Leak location spray LUBRION article no. 626.04 | |||
Leakage detection spray for USA | |||
Snoop Leak detection fluid | |||
Leak detection spray | |||
5 | Spray area of dust boots at top and bottom at right and left air suspension bellows (1) with leak detection spray. | Leak detection spray for China | |
Leak location spray LUBRION article no. 626.04 | |||
Leakage detection spray for USA | |||
Snoop Leak detection fluid | |||
Leak detection spray | |||
6 | Check sprayed areas for leak tightness. | Wait approx. 10 to 15 min after spraying. This allows smaller leaks to be detected (bubbles form). Larger leaks are visible immediately. | |
In the event of a problem, | |||
| |||
Replace or repair corresponding components. | |||
| Install | ||
7 | Install front fender liner at left. |
Repair materials |
Number | Designation | Order number |
BR00.45-Z-1002-03A | Leak detection spray | Christof Fischer GmbH |
BR00.45-Z-1003-03A | Snoop Leak detection fluid | Swagelok Company |
BR00.45-Z-1004-03A | Leakage detection spray for USA | LIQUI MOLY |
BR00.45-Z-1005-03A | Leak location spray LUBRION article no. 626.04 | WIMMER CHEMOTECHNIK |
BR00.45-Z-1006-03A | Leak detection spray for China | Würth (China) Co., Ltd |
Powiązane dokumenty
- ah0000z001901a Wskazówki dotyczące elementów wpływających na bezpieczeństwo
- ah3222p100102lwt Wskazówki dot. układu poziomowania
- ar8810p1300lw Demontaż i montaż wewnętrznej części przedniego błotnika
- ar8810p1300lwe Demontaż i montaż wewnętrznej części przedniego błotnika