MODEL | 231 |
with CODE 486(Sports suspension) | |
without CODE 487(Active Body Control (ABC)) |
1 | Left dashboard bottom section |
2 | Cover |
3 | Electrical connector |
4 | Bolts |
5 | Bracket |
N51/5 | Adaptive damping system control unit |
P32.32-2187-06
5 | Bracket |
6 | Bolts |
7 | Lock slide |
8 | Electrical connector |
9 | Electrical connector |
10 | Electrical connector |
11 | Lock slide |
N51/5 | Adaptive damping system control unit |
P32.32-2188-06
| Remove/install | ||
| Information on preventing damage to electronic components due to electrostatic discharge | ||
1 | Switch off ignition | ||
2 | Remove cover (2) under lower section of instrument panel at left (1) | ||
3 | Disconnect electrical connector (3) | ||
4 | Remove bolts (4) and remove adaptive damping system control unit (N51/5) with bracket (5) and place in footwell | ||
5 | Pull out locking slide (7a) and locking slide (11a) on the adaptive damping system control unit (N515) all the way in the direction of the arrow and detach electrical connectors (8, 10) | ||
6 | Unlock and disconnect electrical connector (9) on adaptive damping system control unit (N51/5) | ||
7 | Remove bolts (6) and remove adaptive damping system control unit (N51/5) from bracket (5) | When replacing the adaptive damping system control unit (N51/5). | |
8 | Install in the reverse order | ||
9 | Check vehicle level at front and rear axle with electronic inclinometer and adjust if necessary | ||
When replacing the adaptive damping system control unit (N51/5). | |||
10 | Perform control unit adaptation with XENTRY | When replacing the adaptive damping system control unit (N51/5). |
Powiązane dokumenty
- ah5400p000101a Wskazówki dotyczące zapobiegania uszkodzeniom elementów elektronicznych na skutek rozładowania potencjału elektrostatycznego
- ar4020p0301rk Sprawdzanie poziomu pojazdu na osi przedniej i tylnej za pomocą elektronicznego przyrządu do mierzenia odchyleń, w razie potrzeby regulacja
- ar6810p1500rk