S32.25-2500-09
1 Shock absorber
2 Service button
4 Fixing screw, shock absorber to semi-trailing arm
3 Fixing screw, shock absorber to bodywork
| Removing and installing | ||
Danger! | Risk of injury due to limbs being trapped or crushed when working on springs or spring bodies under preload | Only use approved clamping devices, if appropriate also screen off danger area. Check special tools for damage and function, (visual inspection). Wear safety gloves. | |
1 | Switch the vehicle to service mode | On vehicles with air suspension hold the service button (2) down approx. 2 seconds before jacking | |
2 | Place an adjustable height support on the rocker arm. | Ensure that the support is correctly installed. | |
3 | Remove the fixing screw (4) holding the shock absorber to the semi-trailing arm. | | |
4 | Remove the fixing screw (3) holding the shock absorber to the bodywork. | | |
5 | Remove the fixing screw (3) holding the shock absorber to the bodywork. | Installation: Ensure that the shock absorber or the pneumatic suspension bellows is correctly installed. | |
6 | Take out the shock absorber (1). | Installation: Pay attention to the correct placement of the shock absorber or the pneumatic suspension bellows. | |
7 | Clean the shock absorbers | | |
| Checking | ||
8 | Install in reverse order |
Rear shock absorber
Powiązane dokumenty
- as0000z000101a Niebezpieczeństwo obrażeń na skutek zakleszczenia lub zmiażdżenia podczas czynności przy wstępnie naprężonych resorach lub elementach sprężynujących.