ar3225s0110e

Remove/install rear shock absorber

Typ ar · temat 32.25 · wersja 0203 · 2020-08-11

Dotyczy: Model 447, 448

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 32 Zawieszenie › 32.25 Amortyzatory, kolumny zawieszenia — Seria 447 · Seria 448

EinPAS 20 Zawieszenie › 20.16 Zawieszenie › 20.16.30 Resor/resor pneumatyczny/amortyzator/kolumna zawieszenia — Seria 447 · Seria 448

AR32.25-S-0110E

Remove/install rear shock absorber

27.07.2020

Model

447, 448

Remove/install rear shock absorber

1

Shock absorber

2

Screw

S32.25-4513-03

Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Warning

Risk of injury from fingers being pinched or jammed when working on gas struts under pressure

Only remove and install pneumatic springs when they are not under tension and when the components are properly secured.

AS00.00-Z-0012-01A

Remove/install

1

Remove respective rear wheel.

AR40.10-S-1100E

2

Support semi-trailing arm.

000 588 10 62 00 Support plate

WS26.00-P-3309B

000 588 11 62 00 Major assembly mount

WS01.00-P-0092B

3

Unscrew screws (2) and remove shock absorber (1).

For this, lower semi-trailing arm slightly.

Installation: Check that shock absorber (1) is correctly positioned.

Screw, rear shock absorber to body/mounting support

*BA32.25-N-1001-03O

Bolt, rear shock absorber to semi-trailing arm

*BA32.25-N-1002-03O

4

Install in the reverse order.

Rear axle shock absorber

Number

Designation

Model 447, 448

BA32.25-N-1001-03O

Screw, rear shock absorber to body/mounting support

Nm

130

Rear axle shock absorber

Number

Designation

Model 447, 448

BA32.25-N-1002-03O

Bolt, rear shock absorber to semi-trailing arm

Nm

130

Powiązane dokumenty