Remove/install rear shock absorber · ar3225p0110tx · Mercedes-Benz WIS

AR32.25-P-0110TX

Remove/install rear shock absorber

2.5.06

MODEL 219.3 except CODE (489) Aromatic (semi-active air suspension)

P32.25-2126-12

1a Left paneling

1b Right paneling

75a Nut

75b Washer

75c Upper rubber mount

P32.25-2127-06

72 Spring control arm

72c Cover

75 Shock absorber

75a Nut

75b Washer

75c Upper rubber mount

75d Lower rubber mount

75e Nut

75f Bolt

 	Remove/install
	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
1	Remove left or right panel (1a, 1b) in luggage compartment		AR68.30-P-4800TX
2	Unscrew nut (75a)	 Counterhold piston rod using open wrench.
			*BA32.25-P-1001-03I
3	Remove washer (75b) and upper rubber mount (75c)
4	Remove rear wheel
	Remove and install wheels		AP40.10-P-4050TX
5	Remove cover (72c) of spring control arm (72)
6	Remove shock absorber (75) of spring control arm (72), to do so undo nut (75e) and remove bolt (75f)		*BA32.25-P-1002-03I
7	Slide damper (75) together and remove
8	Remove lower rubber mount (75d)
	Checking
9	Check upper and lower rubber mount (75c, 75d)	 Replace cracked, oiled and deformed rubber mounts.
10	Inspect shock absorber (75)		AR32.25-P-0121TX
11	Install in the reverse order

 Rear axle shock absorber

Number	Designation			Model 219 steel suspension


BA32.25-P-1001-03I	Nut for attaching shock absorber to frame floor	M10	Nm	20
BA32.25-P-1002-03I	Self-locking nut for attaching shock absorber to spring control arm	M10	Nm	55