Remove/install suspension strut rebound buffer

AR32.25-P-0101RR

Remove/install suspension strut rebound buffer

11.2.08

17.7.06

New removal variant with special tool inserted

Step 1.2

 

Remove/install



Notes on self-locking nuts and bolts

All models

AH00.00-N-0001-01A

1.1

Screw down the nut (1) on the rebound buffer (2)

 Turn the nut (1) only. Using the stabilizer bar assembly tool assortment, counterhold the piston rod otherwise the shock absorber may be damaged.

 There are no requirements for replacing suspension components in pairs, but it is recommended.

 Installation: The nut (1) on the rebound buffer (2) must be replaced.



*BA32.25-P-1002-04D

 Tool assortment for stabilizer assembly

*450589001700

1.2

Push back boot on suspension strut and mount holding device on the piston rod of the shock absorber

 Only when nut on rebound buffer (2) is seized.

 Pay attention to correct and tight seating of holding device.

 See fig. A.

 Holding device

*451589006300

1.3

Hold the holding device with open end wrench and screw nut onto rebound buffer (2)

 Only when nut on rebound buffer (2) is seized.

 Tool assortment for stabilizer assembly

*450589001700

 Holding device

*451589006300

Open end wrench

*450589010100

2

Remove rebound buffer (2)

3

Install in the reverse order

Number

Designation

Model 452.3/4

BA32.25-P-1002-04D

Nut, suspension strut at rebound buffer

Nm

45