AR32.22-S-4000A | Removing and installing the height sensor | 29.3.96 |
MODEL 638.0 /1 with CODE (CL0) Rear air suspension lowerable/liftable
MODEL 638.2 with CODE (CL0) Rear air suspension lowerable/liftable
S32.22-0500-06
1 Service key
2 Electrical connection
3 Adjusting rod
4 Wishbone
5 Bearing
6 Height sensor
7 Bearing screws
8 Height sensor screws
| Removing and installing | ||
1 | Place the vehicle in service mode | Press the service key (1) for approx. 2 seconds before raising the vehicle | |
2 | Raise and secure the vehicle | ||
3 | Unplug the electrical connection (2) | ||
4 | Unscrew the adjusting rod (3) from the wishbone (4) | Do not press the adjusting rod out of the articulation head; risk of breakage! | |
5 | Remove the bearing (3) and the height sensor (6) from the body, unscrewing screws (7) | ||
6 | Remove the height sensor (6) from the bearing, unscrewing the screws (8). | ||
7 | The installation is carried out in reverse order | ||
8 | Check the vehicle level, adjusting if required |