Shown on front axle, right side of vehicle |
1 | Link rod |
2 | Level sensor |
3 | Transverse control arm |
4 | Lever |
S32.22-A010-76
Shown on rear axle, right side of vehicle |
1 | Link rod |
2 | Level sensor |
4 | Lever |
5 | Semi-trailing arm |
S32.22-A011-76
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Topical note | Notes on air suspension | ||
| Remove/install | ||
1 | Raise vehicle. | ||
2 | Remove trim of respective semi-trailing arm. | With rear level sensors (2). | |
3 | Remove link rod (1) from respective lever (4). | To do so, unclip link rod (1). | |
Installation: Link rod (1) must engage audibly on ball head on lever (4). | |||
4.1 | Remove link rod (1) from ball head on respective transverse control arm (3). | With front level sensors (2). | |
To do so, unclip link rod (1). | |||
Installation: Link rod (1) must engage audibly on ball head on transverse control arm (3). | |||
4.2 | Remove link rod (1) from ball head on respective semi-trailing arm (5). | With rear level sensors (2). | |
To do so, unclip link rod (1). | |||
Installation: Link rod (1) must engage audibly on ball head on semi-trailing arm (5). | |||
5 | Install in the reverse order. |
Powiązane dokumenty
- ah3222n100001e Wskazówki dotyczące zawieszenia pneumatycznego
- ar0060s1000e
- ar3525s220001e
- as0000z001001a Zagrożenie życia na skutek ześlizgnięcia lub spadnięcia pojazdu z podnośnika.
- as0000z001701a Niebezpieczeństwo obrażeńo elementy pojazdu o ostrych krawędziach.