ar3222p0004rg

Remove/install left front body acceleration sensor

Typ ar · temat 32.22 · wersja 0200 · 2020-07-15

Dotyczy: Model 190 with code 479 (AMG RIDE CONTROL sports suspension)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 32 Zawieszenie › 32.22 Zawieszenie pneumatyczne — Seria 190

EinPAS 20 Zawieszenie › 20.16 Zawieszenie › 20.16.12 Czujnik/ przełącznik/ wiązka przewodów — Seria 190

AR32.22-P-0004RG

Remove/install left front body acceleration sensor

09.07.2020

Model

190

with code 479 (AMG RIDE CONTROL sports suspension)

Modification notes

08.07.2020

Document completely revised, code M032 (Black Series version) added.

Remove/install left front body acceleration sensor

Shown on model 190 except code M032 (Black Series version)

1

Cover

2

Electrical connector

3

Electric line

4

Nuts

B24/3

Left front body lateral acceleration sensor

P32.22-A006-06

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Switch off ignition and store transmitter key outside of transmission range (min. 2  m).

2

Remove left fender liner at front.

AR88.10-P-1300RG

3

Unclip and remove cover (1).

Model 190
with code 479 (AMG RIDE CONTROL sports suspension)
except code M032 (Black Series version)

4

Release and disconnect electrical connector (2).

5

Expose electric line (3).

Model 190
with code 479 (AMG RIDE CONTROL sports suspension)
except code M032 (Black Series version)

6.1

Remove nuts (4) and remove left front body acceleration sensor (B24/3) with holder.

Model 190
with code 479 (AMG RIDE CONTROL sports suspension)
except code M032 (Black Series version)

6.2

Remove nut from left front body acceleration sensor (B24/3) and remove left front body acceleration sensor (B24/3).

Model 190
with code 479 (AMG RIDE CONTROL sports suspension)
with code M032 (Black Series version)

7

Install in the reverse order.

Powiązane dokumenty