ar3220p0315a

Removing and installing torsion bar on rear axle

Typ ar · temat 32.20 · wersja 0104 · 1997-04-24

Dotyczy: MODEL 129

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 32 Zawieszenie › 32.20 Zawieszenie stalowe, drążek skrętny, Niveaumat — Seria 129

EinPAS 20 Zawieszenie › 20.16 Zawieszenie › 20.16.30 Resor/resor pneumatyczny/amortyzator/kolumna zawieszenia — Seria 129

AR32.20-P-0315A

Removing and installing torsion bar on rear axle

27.5.94

MODEL 129

Removing and installing torsion bar on rear axle

P32.20-0210-05

Removal, installation

Replace self-locking bolts and nuts

1

Remove rear axle.

AR35.10-P-0010C

2

Remove connecting rod (78).

Nut (78a)

*BA32.20-P-1001-04A

Nut (78b)

*BA32.20-P-1002-04A

3

Remove fixing clamps (77b).

Bolt (77c)

*BA32.20-P-1003-04A

4

Remove torsion bar (77).

Installation: Center the torsion bar (77).

5

Remove rubber mount (77a) from torsion bar (77).

6.1

Remove intermediate linkage (81) from torsion bar (77).

Model 129 with adaptive damping system (ADS) with level control, code 216.

Installation: The flat on the intermediate linkage (81) must align with the flat on the torsion bar (76) (arrow).

Nuts (81b, 81e)

*BA32.20-P-1004-04A

7

Install in reverse order.

Rear axle torsion bar

Number

Designation

Model 129

Model 129 with ADS

BA32.20-P-1001-04A

Self-locking nut for fixing connecting rod on torsion bar

Nm

30

30

BA32.20-P-1002-04A

Self-locking nut for fixing connecting rod on spring link

Nm

20

20

BA32.20-P-1003-04A

Self-locking bolts for fixing torsion bar rubber mount on frame floor

Nm

28

28

BA32.20-P-1004-04A

Self-locking nut for fixing intermediate linkage on torsion bar

Nm

–

10

Powiązane dokumenty