ar3200p1000eq

Install/remove emergency buffer

Typ ar · temat 32.00 · wersja 0100 · 2019-01-31

Dotyczy: Model 293

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 32 Zawieszenie › 32.00 Informacje ogólne — Seria 293

EinPAS 20 Zawieszenie › 20.16 Zawieszenie › 20.16.30 Resor/resor pneumatyczny/amortyzator/kolumna zawieszenia — Seria 293

EinPAS 20 Zawieszenie › 20.20 Układ poziomowania › 20.20.30 Resor pneumatyczny/amortyzator/kolumna zawieszenia — Seria 293

EinPAS 20 Zawieszenie › 20.21 Stabilizacja przechyłów › 20.21.31 Amortyzator/ kolumna zawieszenia — Seria 293

AR32.00-P-1000EQ

Install/remove emergency buffer

30.01.2019

Model

293

Install/remove emergency buffer

3

Lower part of emergency buffer

4

Upper part of emergency buffer

5

Protective tube

6

Suspension strut mount

P32.00-2081-06

Danger

Risk of death caused by vehicle slipping or toppling off during lifting

Only lift vehicle at the lift support points specified by the vehicle manufacturer.

AS00.00-Z-0032-01A

Notes on level control

AH32.22-P-1001-02LWT

Install/remove

1

Raise vehicle at affected point at rear.

2

Slide protective tube (5) downward.

3

Insert emergency buffer lower part (3) upward up to end stop with guide pin.

Set of emergency buffers

*205589003100

4

Insert emergency buffer upper part (4) downward up to end stop with guide pin, and turn against emergency buffer lower part (3) up to end stop.

Set of emergency buffers

*205589003100

5

Slide protective tube (5) up together with emergency buffer lower part (3) and emergency buffer upper part (4) up to suspension strut mount (6).

6

Slowly lower vehicle.


The vehicle may be maneuvered only.
Otherwise damage to the vehicle may occur.

7

Removal in the reverse order.

Install/remove emergency buffer

205 589 00 31 00

Set of emergency buffers

Powiązane dokumenty