AR30.10-P-1156BD | Position sensor removal and installation | 26.8.96 |
ENGINE 112.945 in MODEL 463.209 /232 /233 /244 /245 /250
ENGINE 113.962 in MODEL 463.206 /240 /241 /247 /248 /249 /254
ENGINE 606.964 in MODEL 463.308 /330 /331
ENGINE 628.962 in MODEL 463.309 /332 /333
ENGINE 113.982 in MODEL 463.243 /246
ENGINE 113.993 in MODEL 463.270 /271
P30.10-2023-01
Shown on model 463 with engine 606.964
25/3 Lock washer
25/4 Relay lever with integrated spacer sleeve
25/5 Fixed lever
31/9 Return spring
R25 Electronic accelerator (EA [EFP]) position sensor
| Remove/Install | ||
1 | Detach restoring spring (31/9) | ||
2 | Press off lock washer (25/3) | Installation: Ensure correct seat. | |
3 | Pull off relay lever with integrated spacer sleeve (25/4) | Do not unhook the throttle control cable. | |
4 | Disconnect electrical connector | ||
5 | Unscrew the electronic accelerator (EA [EFP]) position sensor (R25) from the fixed lever (25/5) | ||
6 | Install in the reverse order | ||
7 | Inspect throttle control, adjust if necessary | Engine 606.964 in model 463.308/330/331. | |
Engine 112.945 in model 463.209/232/ 233/244/245/250, Engine 113.962 in model 463.206/240/241/ 247/248/249/254, Engine 628.962 in model 463.309/332/333, Engine 113.982 in model 463.243/246 and Engine 113.993 in model 463.270/271. |