S29.10-2506-09
1 Stop lamp switch
2 Return spring
3 Lever on bearing bracket
4 Locking pin
8 Brake pedal
9 Pedal bracket
10 Clutch pedal
11 Pedal bracket
5 Pin
6 Power brake operating linkage
7 Nut
| Remove/install | ||
1 | Remove lower paneling under the firewall | ||
2 | Remove stop lamp switch (1) | ||
3 | Remove return spring (2) of lever on bearing bracket (3) | ||
4 | Pull out locking pin (4) of fastening pin (5) | ||
5 | Pull out pin (5) and loosen power brake operating linkage (6) from the lever on the bearing bracket (3) | ||
6 | Unscrew mounting nut (7) of lever on bearing bracket (3) on brake pedal (8) | | |
7 | Remove brake pedal (8) on carrier (9), clutch pedal (10) and carrier (11) | Pull out brake pedal (8) on the right-hand side Installation: Coat bearing surface of needle bearing with long-life grease | |
8 | Pull out lever on bearing bracket (3) | ||
9 | Install in the reverse order | ||
| Checking | ||
10 | Check correct method of functioning of brake pedal (8) |
Pedals, pedal bracket
Repair materials
Number | Designation | Order number |
BR00.45-Z-1019-06A | ABS sensor grease | A 000 989 62 51 10 |