ar2910s1970e

Replacing retracting spring for brake pedal

Typ ar · temat 29.10 · wersja 0200 · 2016-10-14

Dotyczy: Model 447, 448

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 29 Układ pedału › 29.10 Pedały, wspornik łożyska — Seria 447 · Seria 448

EinPAS 21 Hamulce/instalacja podciśnieniowa/układ sprężonego powietrza › 21.15 Hamulec zasadniczy/instalacja podciśnieniowa › 21.15.20 Pedał hamulca — Seria 447 · Seria 448

AR29.10-S-1970E

Replacing retracting spring for brake pedal

30.09.2016

Model

447, 448

Modification notes

27.09.2016

"Removal and installation tool" added

Operation step 2

Replacing retracting spring for brake pedal

1

Return spring

2

Brake pedal

S29.10-4505-06

Danger !

Risk of injury caused by pinching or crushing when working on springs or spring bodies that are under tension

Use only approved tensioning devices; additionally screen off hazardous area if necessary. Check special tools for damage and proper operation (visual inspection). Wear protective gloves.

AS00.00-Z-0001-01A

Remove/install

1

Remove left cover under the dashboard


Model 447.6/7
with code LC7 (Illumination for front footwell)
Model 447.8, 448

AR68.10-S-1500E

2

Unhook retracting spring (1) from brake pedal (2)

Installation: Check retracting spring (1) is correctly seated on brake pedal (2).

Removal and installation tool

*116589016200

3

Unhook retracting spring (1) at pedal support

Installation: Check that retracting spring (1) is seated correctly on pedal support.

4

Install in the reverse order

Replacing retracting spring for brake pedal

116 589 01 62 00

Removal and installation tool

Powiązane dokumenty