722 589 01 33 00
Extraction tool
The extraction tool is a tool kit and it consists of 6 separate parts.
Position threaded union (03) when inserting into the half-shell (01) so that cutout (a) can be pushed over cylinder pin (b).
01 | Half-shell |
02 | Half-shell |
03 | Threaded union |
04 | Sleeve |
05 | Mounting bolt |
06 | Pressure screw |
a | Cutout |
b | Cylinder pin |
P28.50-2205-03
1 | Screw mounting bolt (05) into intermediate shaft (14a). |
2 | Mount half-shell (01) onto intermediate shaft (14a), as shown. |
3 | Insert threaded union (03) into the half-shell (01). |
Note positioning of threaded union (03). |
4 | Screw in pressure screw (06). |
Fit pressure screw (06) to mounting bolt (05). |
01 | Half-shell |
03 | Threaded union |
05 | Mounting bolt |
06 | Pressure screw |
14a | Intermediate shaft |
P28.50-2206-12
5 | Mount half-shell (02), as shown. |
6 | Mount sleeve (04), as shown. |
7 | Detach ring gear (14). |
To do so, screw in pressure screw (06). |
8 | Remove extraction tool. |
02 | Half-shell |
03 | Threaded union |
04 | Sleeve |
06 | Pressure screw |
14 | Ring gear |
14a | Intermediate shaft |
P28.50-2207-11