1 Remove ball socket (5) from ball head (4).
Note clip.
2 Release nuts (3) on selector lever Bowden cable (2).
D27.60-1115-03
D27.60-1114-01
3 Move selector lever in vehicle to "N" position.
4 Move gearshift lever (1) to "N" position.
Push gearshift lever (1) forward all the way to the stop ("R" position) and then pull the gearshift lever (1) back by one notch ("N" position).
5 By turning the nuts (3) at the same time adjust the selector lever Bowden cable (2) such that the ball socket (5) can be inserted tension-free into the ball head (4) of the gearshift lever (1).
When inserting the ball socket (5) into the ball head (4) the gearshift lever (1) must not move, not position "N".
6 Screw nuts (3) tight.
7 Compare all the positions of the selector lever in the vehicle with the positions of the gearshift lever (1) on the automatic transmission, if necessary adjust selector lever Bowden cable (2).
The ball socket (5) must be capable of being inserted into all positions in the ball head (4) tension -free.
8 Mount ball socket (5) onto ball head (4) and fasten in place.
D27.60-1115-03