AR27.19-S-0410A | Removing and installing the control rod of the pedal position sensor | 11.12.95 |
ENGINE 111.948 /978, 601.970 in MODEL 638 with CODE (G40) Automatic transmission
S27.19-2003-06
1 Control rod
2 Safety device
3 Cup
4 Adjusting lever
5 Support
6 Lever
7 Cup
8 Safety device
9 Support
B71 Pedal position sensor
B71.1 Pedal position sensor control module
| Removing and installing | ||
1 | Remove the safety device (2) and unhook cup (3) in adjusting lever (4) | ||
2 | Unhook the control rod (1) in the support (5) | ||
3 | Remove the pedal position sensor (B71) from its support | Do not unhook the control rod | |
4 | Remove the safety device (8) and unhook the cup (7) from the lever (6) | ||
5 | Unhook the control rod (1) in the support (9) and withdraw | Installation: Pay attention to the correct laying in the engine compartment. Use the existing clips. | |
6 | Installation in reverse order | ||
7 | Adjust the control rod (1) |