ar2719s0200p

Remove/install electrohydraulic controller unit (transmission installed)

Typ ar · temat 27.19 · wersja 0101 · 2019-07-15

Dotyczy: Transmission 700.770 in model 470, 471 with engine 699

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 27 Automatyczna skrzynia biegów › 27.19 Układ elektryczny skrzyni biegów — Seria 470 · Seria 471

EinPAS 17 Zespół przeniesienia napędu/ oś › 17.20 Skrzynia biegów › 17.20.11 Moduł sterujący/ przekaźnik — Seria 470 · Seria 471

EinPAS 17 Zespół przeniesienia napędu/ oś › 17.20 Skrzynia biegów › 17.20.35 Zespół sterujący/ obudowa sterująca/ płyta rozdziału oleju — Seria 470 · Seria 471

Dotyczy też silników/skrzyń biegów: 699 ***, 700 770

AR27.19-S-0200P

Remove/install electrohydraulic controller unit (transmission installed)

14.07.2019

Transmission

700.770 in model 470, 471 with engine 699

Remove/install electrohydraulic controller unit (transmission installed)

1

Connection

S27.19-4548-02

Remove/install electrohydraulic controller unit (transmission installed)

3

Electrical connector

4

Guides

5

Bolts

6

Bolts

7

Bolts

8

Bolts

9

Screw

S27.19-4549-06

Remove/install electrohydraulic controller unit (transmission installed)

1

Connection

10

Electrical connector

S27.19-4550-02

Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Caution

Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil

Wear protective gloves, protective clothing and safety glasses.
Do not pour transmission oil into beverage bottles.

AS00.40-Z-0001-01A

Notes on automatic transmission

AH27.19-P-0001-01NKB

Remove/install

1

Remove automatic transmission oil pan

AR27.10-S-7031P

2

Release and disconnect electrical connector from connection (1)

3

Remove safety clip from connection (1)

4

Release, disconnect electrical connector (3), and detach electrical wiring harness from guides (4)

5

Remove bolt/bolts (5)

Screw, electronic controller unit to transmission

*BA27.60-N-1002-05P

6

Remove bolts (6)

Screw, electronic controller unit to transmission

*BA27.60-N-1002-05P

7

Remove bolts(7)

Screw, electronic controller unit to transmission

*BA27.60-N-1002-05P

8

Remove screws/bolts (8)

Aid of helper required.

Screw, electronic controller unit to transmission

*BA27.60-N-1002-05P

9

Remove bolt (9)

Aid of helper required.

Screw, electronic controller unit to transmission

*BA27.60-N-1002-05P

10

Push connection (1) downwards out of automatic transmission and remove electronic controller unit


Carefully remove electronic controller unit downwards.
Otherwise, the electronic controller unit will be damaged.

Aid of helper required.

Installation: Check electronic controller unit is correctly seated.

11

Release, disconnect electrical connector (10), and remove connection (1) from electronic controller unit

Installation: Replace connection (1).

12

Install in the reverse order

13

Read out and erase fault memory

AD00.00-S-2000-06P

Shift mechanism, control

Number

Designation

Transmission 700.770

BA27.60-N-1002-05P

Screw, electronic controller unit to transmission

Nm

8

Powiązane dokumenty