ar2719d4980a

Remove/install pilot bushing of electrohydraulic controller unit

Typ ar · temat 27.19 · wersja 0101 · 2012-02-21

Dotyczy: TRANSMISSION 722.681 in MODEL 902.6, 903.6, 904.6, 905.6 TRANSMISSION 722.681 in MODELS WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 27 Automatyczna skrzynia biegów › 27.19 Układ elektryczny skrzyni biegów — Seria 902 (modele 6**) · Seria 903 (modele 6**) · Seria 904 (modele 6**) · Seria 905 (modele 6**)

EinPAS 17 Zespół przeniesienia napędu/ oś › 17.20 Skrzynia biegów › 17.20.11 Moduł sterujący/ przekaźnik — Seria 902 (modele 6**) · Seria 903 (modele 6**) · Seria 904 (modele 6**) · Seria 905 (modele 6**)

EinPAS 17 Zespół przeniesienia napędu/ oś › 17.20 Skrzynia biegów › 17.20.35 Zespół sterujący/ obudowa sterująca/ płyta rozdziału oleju — Seria 902 (modele 6**) · Seria 903 (modele 6**) · Seria 904 (modele 6**) · Seria 905 (modele 6**)

Dotyczy też silników/skrzyń biegów: 722 681

AR27.19-D-4980A

Remove/install pilot bushing of electrohydraulic controller unit

15.2.12

TRANSMISSION 722.681 in MODEL 902.6, 903.6, 904.6, 905.6

TRANSMISSION 722.681 in MODELS WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

Remove/install pilot bushing of electrohydraulic controller unit

D27.19-1124-04

1 O-rings

2 Pilot bushing

3 Screw

Remove/install

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

1

Disconnect battery ground line

Isolate ground lead to prevent accidental contact.

Notes on battery

AH54.10-P-0001-01A

2

Detach electrical connector.

AR27.19-D-0750-01B

3

Unscrew bolt (3) and remove pilot bushing (2)

Catch oil running out.
Replace O-rings (1).

4

Install in the reverse order

Powiązane dokumenty