Remove/install boot at gearshift lever

AR26.60-S-6602E

Remove/install boot at gearshift lever

14.02.2017

Model

447 with transmission 700.7, 710.5, 711.6

Modification notes

09.02.2017

Work procedure updated

Operation steps 1 to 5

09.02.2017

Special tool 115 589 03 59 00 Long wedge, added

Operation steps 1, 4

1

Cover

3

Shift lever knob

5

Boot

2

Bolt

4

Spring

6

Locks

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Remove cover (1)


To do so, release cover (1), as shown, from below using long wedge push upwards and pull to rear when removing.
Otherwise, the cover (1) may be damaged.

 Installation: Check for correct installation position of cover (1).

 Long wedge

*115589035900

2

Remove shift lever knob (3)

 Unscrew bolt (2) to do this.

 Bolt, shift lever knob to gearshift lever

*BA26.60-N-1011-01J

3

remove spring (4)

4

Remove boot (5)

 To do so, release the locks (6) of the boot (5), as shown, using a long wedge and remove boot (5) upwards.

 Installation: Check for correct installation position of boot (5) in guides (arrows). Check locks (6) of boot (5).

 Long wedge

*115589035900

Depending on findings



Replace boot (5).

5

Install in the reverse order

 Shift mechanism

Number

Designation

Model 447 with transmission 710.5

Model 447 with transmission 700.7

BA26.60-N-1011-01J

Bolt, shift lever knob to gearshift lever

Nm

8

8

 Shift mechanism

Number

Designation

Model 447 with transmission 711.6

BA26.60-N-1011-01J

Bolt, shift lever knob to gearshift lever

Nm

8