Remove/install reverse gear retainer

AR26.60-S-6530A

27.2.12

ENGINES 111.948 /950 /978 /980, 601.942 /970, 611.980 in MODEL 638 except CODE (G40) Automatic transmission

S26.60-3020-11

1 Screw plug

2 Spring

3 Pin

4 Coupling housing

5 Reverse gear retainer

 	Remove/install
1	Remove transmission	 With engine 111.948/950/978/980 and engine 601.942/970	AR26.10-S-0020A
		 With engine 611.980	AR26.10-S-0020B
2.1	Remove clutch release lever	 With engine 111.948/978 and engine 601.942/970	AR25.20-S-0200A
2.2	Remove central clutch release bearing	 With engine 111.950/980 and engine 611.980	AR25.20-S-0180A
3	Unscrew screw plug (1) from clutch housing (4)	 Installation: Coat thread of screw plug (1) with adhesive.
		 Engine 111	*BA26.60-N-1002-01I
		 Engine 601, 611	*BA26.60-N-1002-01J
		 Torx bit set	*000589011000
		Loctite 243	*BR00.45-Z-1133-02A
4	Remove spring (2) and pin (3)
5	Install in the reverse order

 Shift mechanism

Number	Designation		Model 638 with engine 111.948/978 without Code G40	Model 638 with engine 111.950/980 without code G40


BA26.60-N-1002-01I	Reverse gear locking device to clutch housing	Nm	20	20

 Shift mechanism

Number	Designation		Model 638 with engine 601.942/970 without code G40	Model 638 with engine 611.980 without Code G40


BA26.60-N-1002-01J	Reverse gear locking device to clutch housing	Nm	20	20

Torx bit set

000 589 01 10 00

Repair materials

Number	Designation	Order number
BR00.45-Z-1133-02A	Loctite 243	A 613 989 09 71