AR26.60-S-6510A | Disassembling, assembling shift shaft | 9.7.96 |
ENGINE 111.948 /978, 601.942 /970 in MODEL 638 except CODE (G40) Automatic transmission
S26.60-3011-06
1 Gear selector shaft (with gear selector lever)
2 Dust guard
3 Cover
4 Safety ring
5 Guide rail
6 Spring
7 Spring
8 Guide sleeve
9 Shift finger
10 Shift lock
11 Elastic pin
| Removing | ||
1 | Remove the gear selector group | ||
| Disassembling, assembling | ||
2 | Knock out the elastic pin (11) | Install: Replace the elastic pin | |
3 | Take out the shift finger (9), the shift lock (10), the guide sleeve (8) and the spring (7). | Install: The back (arrow) of the shift finger (9) and the longest lug (arrow) of the shift lock (10) must point towards the counterweight of the shift lever | |
4 | Remove the safety ring (4) | During removal and installation, pay attention not to overtighten the safety ring (4) | |
5 | Take out the guide washers (5) and the spring (6) | ||
6 | Remove the safety ring (4) and take out the cover (3) | During removal and installation, pay attention not to overtighten the safety ring (4) | |
7 | Remove the radial retainer of the cover (3) | Install: Replace the radial retainer | |
8 | Remove the upper bearing of the gear selector group | ||
Impact drift | |||
9 | Install in reverse order |
638 589 15 15 00
Drift punch