P26.60-2350-04
Shown on engine 132.930
1 Shift actuator
2 Electrical connector
3 Electrical connector
4 Bolts
| Remove/install | ||
1 | Use STAR DIAGNOSIS to set shift actuator (1) to neutral | Installation: Perform commissioning without control unit replacement. Observe menu guidance in DAS (DAS). When replacing the shift actuator (1) the fault memory must be read out and erased if necessary. | |
| Connect STAR DIAGNOSIS and read out fault memory | ||
2.1 | Remove resonance tank | For engine 132.910 | |
2.2 | Remove fresh-air supply for charge air cooler | Engine 132.930 | |
Engine 660.9 | |||
3 | Detach electrical connectors (2, 3) on shift actuator (1) | ||
4 | Remove bolts (4) | Replace screws (4). | |
| |||
5 | Detach shift actuator (1) from transmission and remove | Installation: Clean sealing surfaces on the shift actuator (1) and transmission, then apply the sealant in the form of a bead with a height and width of approx. 2.0 0.5 mm. | |
Sealing compound | |||
6 | Install in the reverse order |
Shift mechanism
Number | Designation | Transmission | |
BA26.60-P-1006-01C | Bolt, shift actuator to transmission | Nm | 20 |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1053-01A | Sealing compound | Q0000282V000000000 |