S26.50-4522-09
1 | Retaining ring | 7 | Synchronizer ring | 13 | Friction ring | ||
2 | Constant-mesh gear | 8 | Sliding sleeve | 14 | Spacer ring | ||
3 | 3rd gear fixed gear | 9 | Thrust piece | 15 | 5th gear idler gear | ||
4 | 6th gear idler gear | 10 | Synchronizer body | 16 | 5th gear needle roller bearing | ||
5 | 6th gear needle roller bearing | 11 | Synchronizer ring | 17 | Countershaft | ||
6 | Distance sleeve | 12 | Cone ring | 18 | Oil guide ring |
| Remove | ||
1 | Fasten transmission on assembly stand | ||
2 | Disassemble transmission housing | ||
3 | Remove countershaft (17) | ||
| Disassemble | ||
4 | Disassemble countershaft (17) | ||
Drift | |||
| Check | ||
5 | Clean components and check for wear and damage | Replace affected parts if damage or wear determined. | |
| Assemble | ||
6 | Assemble countershaft (17) | ||
Drift | |||
Sleeve | |||
| Install | ||
7 | Install countershaft (17) | ||
8 | Assemble transmission housing | ||
9 | Detach transmission from assembly stand |
716 589 02 33 00
Sleeve
366 589 02 15 00
Drift
711 589 17 15 00
Drift