Remove/install reverse idler shaft with reverse gear

AR26.50-S-2002-01E

Remove/install reverse idler shaft with reverse gear

MODEL

447 with TRANSMISSION 711.6

 Gear set, shafts

Number

Designation

TRANSMISSION 711.680

BA26.50-N-1002-01D

Mounting bolt, reverse idler shaft to transmission housing

M8

Nm

20

1

Remove bolt (1).

2

Remove bearing shell (6).

3

Remove thrust plate (4), reverse idler gear (3) and cylindrical roller bearing (2).

4

Pull out reverse idler shaft (5).

5

Check all components for damage and wear and replace defective components.

6

Insert reverse idler shaft (5)

7

Insert bolt (1) and align threaded hole of reverse idler shaft (5) with bolt (1).

8

Pull out bolt (1) again.

9

Apply a thin coating of transmission oil to reverse idler shaft (5), cylindrical roller bearing (2) and thrust plate (4).

10

Slide cylindrical roller bearing (2), reverse idler gear (3) and thrust plate (4) onto reverse idler shaft (5).

 The inscription on the reverse idler gear (3) must point toward the drive side.

11

Install bearing shell (6).

 The inscription on the bearing shell (6) must point toward the drive side.

12

Screw in bolts (1)  .

 Replace bolt (1).