P26.50-2312-09
Shown on tapered roller bearing (2) of transmission housing (3) |
1 | Bearing shell | 4 | Tapered roller bearing | |
2 | Tapered roller bearing | 5 | Differential | |
3 | Transmission housing | 6 | Workshop press |
| Disassemble | ||
1 | Disassemble manual transmission | ||
| Remove | ||
2 | Remove radial shaft sealing rings of axle shafts | ||
3 | Remove bearing shell (1) in transmission housing (3) or bearing shell in clutch housing, as shown, using suitable tool | ||
4 | Remove tapered roller bearing (2) of transmission housing (3) or tapered roller bearing (4) of clutch housing from differential (5) | Puller, two-arm | |
Puller arms | |||
| Install | ||
5 | Position differential (5) on workshop press (6) | ||
6 | Align new tapered roller bearing (2) of transmission housing (3) or new tapered roller bearing (4) of clutch housing on differential (5) and press on | Drift | |
7 | Position transmission housing (3) or clutch housing on workshop press (6) | ||
8 | Press new bearing shell (1) into transmission housing (3) or new bearing shell into clutch housing | Drift | |
9 | Install radial shaft sealing rings of axle shafts | ||
| Assemble | ||
10 | Assemble manual transmission |
711 589 11 15 00
Drift
126 589 00 34 00
Puller arms
203 589 05 15 00
Drift
000 589 88 33 00
Puller, two-arm