AR26.50-P-0420-05E | Measuring distance from 3rd/4th gear synchronizer body to contact surface of intermediate plate | Model 461 with transmission 717.44 as of transmission end no. 6041163 Model 463 with transmission 717.43 as of transmission end no. 6041163 |
Test and adjustment values - gear assembly
Number | Designation | Transmission 717.4 | |
BE26.50-P-1006-01A | Distance between 3rd/4th gear synchronizer body and intermediate plate | mm | 138.4 |
Workshop equipment
WE58.40-Z-1002-19A | Depth gage |
P26.50-2028-01
1 Place intermediate plate on vise and insert main shaft in intermediate plate using suitable drift punch.
P26.40-0315-02
2 Measure from the end face of the 3rd and 4th gear synchronizer body (7) to the joint face of the intermediate plate (49) with sealing washer (dimension b) using a depth gauge.
Shims are available in thicknesses of 0.1 mm, 0.3 mm and 0.5 mm.
Calculation example:
Specified dimension 138.4 mm
Dimension measured 138.2 mm
Shim 0.2 mm
P26.50-2029-01
3 Press main shaft out of intermediate plate using a suitable drift punch.
4 Slide selected shims (44) onto main shaft.
P26.50-2028-01
5 Press main shaft into intermediate plate using a suitable drift punch.
6 Carry out check measurement.
P26.50-2030-01
7 Attach locking ring (43b) of main shaft deep-groove ball bearing (43a).