AR26.50-P-0420-05D | Measuring distance from 3rd/4th gear synchronizer body to contact surface of intermediate plate | Model 461 with transmission 717.44 up to transmission end no. 6041162 Model 463 with transmission 717.43 up to transmission end no. 6041162 |
Test and adjustment values - gear assembly
Number | Designation | Transmission 717.4 | |
BE26.50-P-1006-01A | Distance between 3rd/4th gear synchronizer body and intermediate plate | mm | 138.4 |
Workshop equipment
WE58.40-Z-1002-19A | Depth gage |
P26.50-2025-01
1 Place intermediate plate on vise and insert main shaft with tapered roller bearing in the intermediate plate.
Turn main shaft so that the tapered roller bearing is seated correctly.
P26.40-0315-02
2 Measure from the end face of the 3rd and 4th gear synchronizer body (7) to the joint face of the intermediate plate (49) with sealing washer (dimension b) using a depth gauge.
Shims are available in thicknesses of 0.1 mm, 0.3 mm and 0.5 mm.
Calculation example:
Specified dimension 138.4 mm
Dimension measured 138.2 mm
Shim 0.2 mm
P26.50-2026-01
3 Hammer main shaft bearing outer bearing race out of intermediate plate using a suitable tool.
P26.50-2027-01
4 Insert selected shims (44) in the intermediate plate.
5 Press outer bearing race into intermediate plate using a suitable thrust piece.
6 Carry out check measurement.