P26.50-2218-09
Removing
1 Remove circlip (2) of output shaft roller bearing (3).
2 Position rear section of transmission housing (1), as shown, into the hydraulic press (4).
Hydraulic press (4) 25 t
http://gotis.aftersales.mercedes-benz.com
3 Press output shaft roller bearing (3) using suitable drift (5) and hydraulic press (4) out of the rear section of transmission housing (1).
4 Remove rear section of transmission housing (1) from hydraulic press (4).
P26.50-2219-06
Install
5 Position rear section of transmission housing (1), as shown, into the hydraulic press (4).
6 Position output shaft roller bearing (arrow) onto rear section of transmission housing (1) and using suitable drift (6) and hydraulic press (4) press all the way in to the rear section of the transmission housing (1).
Ensure that the rear section of the transmission housing (1) is not damaged, as it otherwise must be replaced.
A max. pressure of 1 bar may be applied to the hydraulic press (4).