Pressing on tapered roller bearing

AR26.50-D-0440-02TSF

Pressing on tapered roller bearing

 Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Transmission

700.760 in model 910 with engine 651

 Gear set, shafts

Number

Designation

Transmission 700.760 in model 910

BA26.50-N-1001-01TSF

Main shaft center bolt

Nm

100

1

Install lower bearing (4).

 To do so, use tool "A" (5) from  tool kit.

 Commercially available devices/tools
Workshop press

2

Remove main shaft from vise and clamp in again turned to install upper bearing (1).

 Use suitable protective jaws.

3

Install upper bearing (1).

 To do so, use tool "M" (6) from  tool kit.

 Commercially available devices/tools
Workshop press

4

Clamp main shaft in vise.

 Use suitable protective jaws.

5

Screw in new center bolt (2)   .

 Screw in center bolt (2) counterclockwise (left-hand thread).

6

Remove main shaft from vise.