AR26.40-P-0339FF | Remove/install radial shaft seals of axle shafts (transmission installed) | 3.3.04 |
TRANSMISSION 717.47 in MODEL 454.0
P26.40-2065-11
Shown on transmission which has been removed
1 Radial shaft seal
2 Transmission housing
| Remove/Install | ||
1 | Remove left or right front axle shaft | Engines 134.9, 135.9 | |
Engines 122.950, 639.939 | |||
2 | Using a suitable tool, lever radial shaft sealing ring (1) out of transmission housing (2) | Do not damage transmission housing (2) otherwise leaks may occur. | |
Installation: Use the drift to carefully drive radial shaft sealing ring (1) into the transmission housing (2). The radial shaft sealing ring (1) must lie flush with the transmission housing (2). | |||
| |||
3 | Install in the reverse order |
Drift
454 589 03 15 00