ar2640p0335mcc

Remove/install drive shaft radial shaft sealing ring

Typ ar · temat 26.40 · wersja 0102 · 2014-01-25

Dotyczy: TRANSMISSION 717.48 in MODEL 451.3/4

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 26 Mechaniczna skrzynia biegów › 26.40 Obudowa — Seria 451 (modele 3**, 4**)

EinPAS 17 Zespół przeniesienia napędu/ oś › 17.20 Skrzynia biegów › 17.20.30 Obudowa/pokrywa/miska olejowa/zawieszenie — Seria 451 (modele 3**, 4**)

Dotyczy też silników/skrzyń biegów: 717 48*

AR26.40-P-0335MCC

Remove/install drive shaft radial shaft sealing ring

20.1.14

TRANSMISSION

717.48 in MODEL 451.3/4

Remove/install drive shaft radial shaft sealing ring

1	Front section of transmission housing
2	Radial shaft seal

P26.40-2110-06

	Remove
1	Remove central clutch release bearing	Remove/install central clutch operator	AR25.20-P-0180MCC
2	Remove radial shaft sealing ring (2) using corresponding tool from transmission housing front section (1)	 Guide tool between drive shaft and radial shaft sealing ring (2), twist and pull out of transmission housing front section (1)
		 Removal and installation tool	*116589016200
	Install
3	Knock radial shaft sealing ring (2) all the way into front section of transmission housing (1) using drift	 Moisten the sealing lip of the new radial shaft sealing ring (2) with transmission oil.
		 Drift	*454589021500
4	Install central clutch release bearing	Remove/install central clutch operator	AR25.20-P-0180MCC

Remove/install drive shaft radial shaft sealing ring

Remove/install drive shaft radial shaft sealing ring

454 589 02 15 00

Drift

116 589 01 62 00

Removal and installation tool

Powiązane dokumenty

ar2520p0180mcc