AR26.40-P-0335FF | Remove/install drive shaft radial shaft sealing ring | 27.6.07 |
TRANSMISSION 717.4 in MODEL 454.0
P26.00-2118-08
1 Front section of transmission housing
2 Radial shaft seal
| Remove/install | ||
1 | Remove central clutch release bearing | ||
2 | Remove radial shaft sealing ring (2) using an appropriate extractor sleeve from the transmission housing front section (1) | | |
Installation: Replace radial shaft sealing ring (2) and moisten the lip with transmission oil. Knock in radial shaft sealing ring (2) until it abuts with the front section of transmission housing (1) using drift. | |||
| |||
3 | Install in the reverse order |
454 589 02 15 00
Drift
Set of extractor sleeves
454 589 01 14 00